Last Updated on March 6, 2023
When it comes to cleaning carpeted or uncarpeted rooms, most people prefer to choose Dyson Animal Vacuum. This one is perfect for all types of flooring. It is extensively used in homes where pets are present due to the ability to deal with lots of pet hair.
Sometimes, the Dyson Animal vacuum loses its suction power and requires thorough cleaning. The filter might be surrounded by hair or dirt, which hinders the overall suction of the vacuum.
Therefore, it is necessary to clean components regularly to avoid any malfunctioning. If you do not know how to clean a Dyson Animal Vacuum, here you will find the whole procedure in detail.
How to Empty A Dyson Ball Vacuum
Dyson Ball vacuums are convenient for people who find difficulty in mobility. You can easily move around to clean the entire house without lifting the whole body of the vacuum. The ball assists in rotation from corner to corner without requiring much effort in cleaning.
- Turn off the power supply to the Dyson ball vacuum before cleaning it.
- Look into the bin; if it is filled with dirt, you must empty it.
- You will find a catch present on the vacuum handle, which can empty it. Place garbage can provide below to empty the cleaner in it.
- Make sure each particle of dust falls into the garbage can.
- Insert the bin back to its position.
Step By Step Guide
The following steps are involved in cleaning the Dyson Animal vacuum:
Clean The Filter
The filter plays a great role in cleaning, and it is important to keep it clean. It could have piles of dust, debris, and bacteria. Ignoring its cleaning for longer will negatively impact the whole vacuum system.
Some Dyson vacuums have one or two filters, and each must be cleaned properly. You first need to remove the filter from its position. Then place the filter beneath cold running water to get off dirt.
Avoid using detergents and use only plain water for cleaning. If there is hard debris deposition, use a toothbrush to scrub them. Let the filter dry in the air for some time, and do not put it back until it is fully dried.
Clean Cyclone Component
HOW TO CLEAN A DYSON ANIMAL CYCLONE | DC 66 UPRIGHT BALL ANIMAL VACUUM | EASY STEPS |ONE TOOL NEEDED – YouTube
One most important components of Dyson Animal vacuums is Cyclone which gathers dirt and hair. It usually gets blocked due to lots of debris and hair collected during cleaning. So, you should never ignore its cleaning to keep running your vacuum in a smooth state.
You should wash it once in three months for proper maintenance. You will find the detailed procedure to clean the cyclone component later in this post.
Remove Dirt From Head
The next part you need to clean is the head of the Dyson Animal vacuum. To detach its head, you must position the vacuum on its back to reach the red latch near the head. By pressing the latch, the head will be removed. Clean the head thoroughly to get rid of dust.
Red levers are also present on the vacuum head that can be pulled from outside, and You can look inside the head to clean dirt.
Unblock The Hose
The pet hair can easily block the hose and brush of the Dyson Animal vacuum. The vacuum won’t be able to perform cleaning activities due to these cloggings. You must remove such blocking materials.
Detach the hose to clean and reassemble it back to its location after inspecting it thoroughly.
How to Clean Dyson Animal Vacuum Cyclone Component
Remove Bin & Cyclone Component
You need to remove the bin and the cyclone component in the first step. You can remove these parts in a similar way you remove the dust cup of a vacuum.
Empty The Canister
The next step requires you to detach the canister and empty it. Then separate the bin from the vacuum’s cyclone component.
Wash Cyclone Component
Wash the cyclone component inside a large sink with warm water. Do not use too hot or boiled water. Wash each component’s side to ensure all dirt has been removed. Also, run water through the holes until clean water comes out through them.
Rinse It Thoroughly With Water
Now add water inside the cyclone component till it fills up. Enclose the large component hole to stop the water removal through that end. Shake the cyclone well to clear the dirt attached to the inner parts.
After shaking it, remove the dirty water and rinse it again. Keep repeating this till even a single particle of dirt gets out of it, and then place it to dry.
Why Should You Clean Dyson Animal Vacuum Cyclone Component
Cyclone is Dyson Animal vacuum’s most important component that requires special cleaning. Here are some reasons for the need for its cleaning:
- Whatever type of vacuum cleaner you have, it will start to smell bad after continuous use. By cleaning the cyclone component, you can get rid of these smells.
- In order to ensure the longevity of vacuums, the main component should stay in a good state. Therefore, regular cyclone maintenance means a longer lifespan for the entire vacuum system.
- A cyclone component controls the suction power of the Dyson Animal vacuum. If it is dirty, your vacuum will not suck any dirt.
Can You Wash the Filter on Dyson Animal Vacuum
It is important to wash the filter of the Dyson Animal vacuum. The clogged or dirty filter will hinder the normal functioning of the vacuum. The experts highly recommend washing the filter once in three months. You can also clean it on a daily basis if you are using it more often. However, replacing it will be a better option if its condition is bad.
Final Thoughts
Due to top-notch features, Dyson has been rated as one of the best brands of vacuums. Just like other models, the Dyson Animal vacuum also requires regular care and maintenance. Cleaning is essential to ensure its long lifespan.
Emptying and cleaning these vacuums isn’t difficult. You can follow the right tips and methods to make sure everything stays firm. Our guidelines are tested to help you do this task without any trouble.
Leave a Reply