Table of Contents
Last Updated on July 23, 2022
Dyson V11 is one of the best vacuum cleaners among all others. A Dyson vacuum cleaner keeps performing well when it is cleaned often. A vacuum cleaner may become blocked, lose its suction power, not spin, or even crack if it is not cleaned regularly. It is usually a good idea to first conduct some research on the best ways to clean a particular vacuum cleaner.
In this DIY guide, we’ll learn how to clean Dyson V11 without any hassle.
Steps for Cleaning the Dyson V11
The followings are very important steps to clean the Dyson V11:
Disconnect Every Component from the Dyson V11
As a first step, make sure the Dyson vacuum is shut down. Remove the power cord from it and make sure it is not still on. Then, unplug the vacuum cleaner completely. It is recommended that the brush of suction, the rod of the vacuum cleaner, and any other accessories be kept apart from one another.
You may also like to read: Sencor Vacuum cleaner Reviews.
Empty the dust bin of Dyson
Since the Dyson V11 is bagless, therefore, you must dump it in the trash bin. Fortunately, the red lever may frequently make this simple.
Clean the Dust Container
Once the dust bin is emptied, it is strongly advised that you use a dry microfiber cloth to clean the trash bin as well. A Dyson’s dust container is visible, so it’s nice to keep it tidy.
Check the Dyson V11 Rod for Possible Blockages
Checking for any obstructions in the vacuum cleaner rod is something that people sometimes overlook while cleaning a vacuum cleaner. Having pine needles in a drain can cause a clog to form rapidly. The vacuum cleaner’s suction power may suffer from such an obstruction. So, it is very crucial to check this rod to avoid any blockage.
Use Again When Dyson V11 Ready
Once you’ve cleaned everything, the Dyson V11 will look brand new. The Dyson vacuum cleaner can be made operational by re-connecting all of its components. Make sure the Dyson vacuum cleaner HEPA filter has been allowed to dry for at least 24 hours and is indeed dry before using it again.
Methods For Clean the Filters of Dyson V11
Dyson vacuum cleaners come with many filters. Each filter is purple and is situated close to the cyclone. We can easily remove the dust canister to change the filters by unscrewing the base and giving the filter a little shake. With a moist microfiber towel, we may easily clean the filter if it becomes soiled. Be cautious not to use any detergent and never put the filter in the washing machine while cleaning it.
Cleaning the Post-Filter
Clean the Dyson V11 vacuum if you see a buildup of dust, dirt, or debris inside of it. Simply disconnect the vacuum cleaner from the power socket and take off the post-filter and free-filter to accomplish this. To take off the post-filter simply rotate it in the other direction. Before reinstalling it, make sure to thoroughly wash it in clean water.
The filter may be cleaned using the included cleaning agent. After that, rinse it under a cold-water faucet. You might need to clean both the pre-filter and the post-filter in the Dyson v11 depending on the kind of filter you fitted. A HEPA filter is typically used as the post-filter to stop allergens from spreading throughout the house.
Cleaning the Pre-Motor Filter
You must clean the Dyson v11 vacuum cleaner pre-motor filter if it is dusty. This filter is situated below the cyclones on the lower portion of the vacuum. Turning the pre-motor filter counterclockwise and carefully washing it will allow the users to remove it. Before reinstalling the pre-filter in the Dyson vacuum, make sure it is dry.
Every month or every four to six months, the pre-motor filter has to be cleaned. Simply remove the machine’s filter and thoroughly clean it with running water. Leave it to dry, especially in an area with good ventilation. The motor may be harmed if the filter is left moist. To extend the life of the vacuum cleaner, clean the filter often. This filter has a lifetime guarantee and is simple to change.
Cleaning the Brush Roll
Continue reading if you want to learn how to easily clean the brush roll on your Dyson V11 vacuum. You’ll need to clean it if it stops spinning. Rub the roller brush and screw-shaped tangle-free micro brush together to remove them from a Dyson V11 for cleaning.
The Dyson V11 vacuum cleaner’s floor head should be taken off first. Unscrew the little collar that covers the brush bar to accomplish this. After removing the end cap, rotate it. Once the brush roll is taken off, thoroughly clean it to maintain it functioning properly. To avoid clogs and maintain the roller brush’s suction power, frequently clean it.
Dry The Filter for 24 Hours
Reattaching the filter to the Dyson vacuum cleaner shouldn’t be done right away. Before being reinstalled, the HEPA strainer has to dry for almost 24 hours. Put the filter in a warm location, such as next to a heater.
How To Select Power Mode After Cleaning The Dyson V11?
For several generations, Dyson has let consumers choose their preferred power settings. Three settings are available with the V11 to assist maximize up to 60 minutes of fade-free cleaning on a single charge. Here are three options we can use to set the power mode:
- Green stands for eco, which is ideal for cleaning lightly or hard surfaces.
- Blue for auto, which determines the amount of power required based on the kind of flooring it detects. When the Torque Drive Head is engaged, auto mode is immediately engaged.
- For those grimier places, red for max or boost is ideal.
Conclusion
Cleaning the filter should be your first step if you’re having issues with your Dyson V11. To maintain the Dyson vacuum cleaner operating effectively, the tiny filter must be cleaned often. The filter has to be soaked in cold water to be cleaned. Squeeze the filter to get rid of any leftover water after cleaning it. There can be a need to reinstall the filter in the vacuum when it has dried.
Leave a Reply