Last Updated on April 27, 2022
Covering your walls with flat paint is the safest option always. But getting it stained or dirty is no lesser than a heartbreak. Leaving the mark for long can lead to a tiresome cleaning process; it’s better to clean it quickly.
Rooms are mostly painted with latex or alkyd paints as they are known to be washable and durable. The finishes on these paints vary, and one of the most prevalent finish is Flat. With extra care, you can clean the flat paint and make it look as good as new.
One thing to remember during all this is the proper selection of cleaning material. A material that is harsh or improper might irreversibly ruin your wall. Fortunately, there are a variety of ways to help you out. Let’s take a look at how to clean walls with flat paint easily, below:
Do you have Flat paint?
Before we go through the depths of this article, find this necessary thing out – do you have flat paint? We are not concerned with the texture of your walls, but the finish. This type is usually known as the Matte finish.
The paint is known not to reflect light. This is one of the reasons it is preferred to hide any imperfection at the ceiling. If your walls are not reflecting light, even from a single angle, that’s when you can be sure it’s a flat paint.
What do you need?
Head to your cabinet that holds all your cleaning supplies and find these little goodies:
- Cloth or sponge (preferred)
- An eraser sponge
- Some white vinegar
- A foam cleanser
- Some detergent
- Paintbrush and touch-up paint can
How to clean walls with flat paint? 4 easy ways
Sometimes the stain doesn’t require detailed cleaning. You can opt for a single cleaning supply if the stains don’t necessitate excessive cleaning. In that case, you may begin with these:
1. Wipe off from the walls
You may get confused about the depth or size of the stain when you first look at it. However, sometimes the stain is not as deep as it seems. Therefore, it is easier to clean. To keep yourself and your walls at a safe side, prefer to start with the least destructive method.
We’d advise you to assign this job to a clean rag. Dip the cloth in the water. Remember, it should be damp not dripping. Wipe the area softly. Try to lend proper strokes. Please don’t rub it off; be very gentle. Continue doing it until the area is clean, or you see no evident effects.
Note: if you don’t see an effect, don’t get harsh on it. This might not be the right cleaning aid, switch to another one.
2. Foam cleanser to the rescue
We tried being mild, but it looks like this isn’t the case needed anymore. Let’s hop onto a stronger and much more resilient option – the foam cleanser. We want to make it clear to you that harsher methods add to the disruption of the paint finish. Even if this method is rough, try to be the gentlest you can be with it.
Start by spraying the foam cleanser onto the stained area. The spray cleaners come with detailed instructions about the time needed to wait until wiping it off. With that in mind, act accordingly and see if this brought noteworthy results.
In the end, use a damp cloth to finish the process.
3. Detergent – the last resort
It looks like the above methods have failed to remove this tough guy on your paint. You may ask someone from your family about how to clean marks off walls with flat paint. However, this method might be the most helpful for you.
Get your hands on your laundry detergent. To start, make sure you dilute the detergent as if directly applied, it will cause harm to the wall. Carefully measure a gallon of water out and fill a bucket that you can keep within your reach.
Now mix a tablespoon full of detergent in the water and stir until bubbly. Use a clean cloth then dip it in the mixture. Start wiping off the stain with the damp cloth and continue until the stain is gone. We would advise you to try out the mixture at a location that is not visible and will not be seen if affected.
If you figure out that this method is not harming the paint, you may proceed to the stain and clean it.
4. It looks like it needs a detailed cleaning:
There are specific sites that assist in cleaning the stubborn stain. This stain is not leaving any matter how hard you try. Websites like Molly Maid or ALLBRiGHT provide licensed housekeepers that do the tedious chore for you.
For further references, you may even learn how they do it then try it yourself. This is the most genius way to get the best out of the least around you.
You should also know: What Is The Drying Time For Minwax Stain?
So what did we conclude?
We tried out best to provide you with the best options to clean a flat paint wall. It was simple to predict the answer to the question ”How to clean walls with flat paint?” is hidden in the walls. The difference between paints and brands also affects the results of cleaning aids.
Sometimes it will be the easiest thing to do. However, in other instances, you might need professional help. The best way to prevent a disaster of this sort is to buy a paint that is sold under the tag of ”easy-clean” or ”stain-proof”. You will at least be relaxed if it turns out otherwise as the only help you will need will be that of the service provider.