How To Clean Whirlpool Tubs? A Step-By-Step Guide To Clean Jetted Tubs

Last Updated on April 27, 2022

It is the weekend and you want to take a comfortable bath to relax your muscles and joints in your whirlpool bathtub. Unfortunately, you come across gross, slime, and nasty jets in the bathtub. It can ruin your whole weekend. Do not worry at all, you can clean your jetted bathtub with a few simple steps.

If you have moved into a new house or you have not been able to use your jetted bathtub over some time, it can accumulate bacteria, mildew, and jets might rust. It is a good idea to keep the connection off if you are not using it for a long time.

However, if your bathtub has accumulated any rust, bacteria, gross, or slime, we will tell you how to thoroughly clean the mess. If you are thinking of how to clean whirlpool tubs, you are on the right page.

Read below to find a list of methods for cleaning jetted tubs with dishwasher detergents, vinegar, and many other household hacks.

Cleaning a whirlpool bathtub is actually not that hard and it actually takes a few minutes from our time. With a little extra effort and regular maintenance, your job can significantly become easy. You might notice these accumulations in your bathtub:

• Slime coming out of bathtub jets.
• Hard water deposits on the faucets and bathtubs
• Bacteria and mildew grow in random areas due to moisturized surfaces.
• Rusty material around the faucets.
• Oils from the bath product often accumulate in the water pumps.

First of all, you need to fill water in your bathtub a bit above the jet surface. Fill water in the whirlpool bathtub and make sure it is around 1 inch above the surface. Now turn off the valves that support air induction in the bathtub.

Dishwashing detergent can help you clean the bathtub in a great manner. Detergent would help you get rid of grease in the bathtub. If you want to do a deep cleaning, it is ideal to use a small amount of bleaching in the bathtub. Make sure to wear gloves, bleach can damage your skin.

Things you will need:

• Dishwashing detergent
• Bleach
• Sponge
• Brush
• Gloves

Steps:

• First of all, wear gloves.
• Fill the water one inch above the jet in the bathtub.
• Take 4-5 tablespoons of dishwashing detergent and add it to the water in the bathtub.
• Now take half a cup of bleach and pour it into the water tub.
• Leave it for 10-20 minutes.
• Let bleach and dishwashing detergent do their work.
• Now turn on the jets and let water circulate at the highest pressure.
• Once you notice all the dirt has left the jets clean and no grease or slime is there, empty the bathtub.
• Check out if any remaining dirt is there.
• Use a brush to clean the faucets and narrow areas.
• You can also sponge the whole tub to get rid of bacterias.
• Now give it a refill with clean cold water.
• Empty the tub and let it dry.

Vinegar is an effective natural cleaner. People are using vinegar over a period of time for its natural cleaning properties. The best thing about vinegar is its non-toxic ability to clean stuff. You can use vinegar to clean a whirlpool jetted bathtub. Vinegar will help you get rid of bacterias and dirt from the nasty jets

Things you will need:

• White vinegar
• Baking soda
• sponge/brush
• Gloves.

Steps:

• Wear gloves.
• Fill the bathtub 1 inch above the jet surface.
• Now take 2 cups of vinegar and pour it down the water.
• Add 1-2 tablespoons of baking soda to the bathtub.
• Mix the water with your hand slightly.
• Now let the baking soda and vinegar do their job.
• Wait for 20 minutes.
• Now turn on the jets at high pressure.
• Once you notice the jets are clean, turn off the jets.
• Drain out all the water from the tub.
• Look closer if any first is remaining around the corners and jets.
• Use a brush and clean it.
• Use a sponge to clean the whole bathtub and make it bacterial-free.
• Now run another cycle with cold water.
• Drain the water and let the bathtub dry.

Sometimes you observe that your bathtub is not providing you any foamy texture in the bath. It can be due to dirt accumulation. Grease, products, and hard water deposits often accumulate in the filters of the jets in the bathtub. Consequently, water pressure significantly slows down.

In order to clean your jets:

• You can soak the jets for three to four hours. It will break down hard deposits.
• Otherwise, you have to remove the filter from the jet. Thoroughly clean the filter and place it again. You can use a soft-bristled brush to scrub the filter, wash it with dishwashing liquid, rinse and place it back.

In case of serious damage, you might need to replace your jet filters. However, regular maintenance and clean-up will help you prevent major expenses such as the replacement of jets and their filters. In case you have not been using the bathtub for long and deposits are so intense, you can seek help from professional cleaners in the town.