• Skip to primary navigation
  • Skip to main content
  • Skip to primary sidebar

Clean Home Lab

Cleaning Products Tips and Reviews

  • Home
  • Carpet Cleaning
    • Make Carpet Fluffy
    • Carpet Freshening
    • Mold Out of Carpet
    • Clean Rug At Home
    • Make Carpet Look New
    • Proheat Pet Carpet Cleaner
    • Carpet Cleaner Not Suctioning
    • Doctor Carpet Cleaner
    • Remove Carpet Glue
    • Remove Odors
  • Dishwasher
    • Tall Tub Dishwasher
    • Dishwasher Run
    • Clean Dishwasher
    • Clean Dishwasher Drain
    • Dishwasher AMPS Usage
    • Dishwasher Not Drying
    • Dishwasher Smells
    • Dishwasher Gets Hot
    • Reset Kitchenaid Dishwasher
    • Dishwasher Tablet
    • Clean Coffee Maker
  • Drain Cleaning
    • Dishwasher Leaking
    • Drain Dishwasher
    • Splash Toilet Cleaner
    • Drain Cleaner
    • Remove Algae
    • Kitchen Drain Cleaners
    • Kitchen Sink Clogged
    • Germ Guardian
    • Self-Cleaning Oven
  • Floor Cleaning
    • Spin Mop
    • Linoleum Floor Cleaners
    • Vacuum Cleaning
      • Bissell Crosswave Guide
      • McCulloch MC1375
      • Irobot Roomba 650
      • Shark Apex Vacuum
      • Vacuum Smell Burnt
      • Remove Dyson V6 Battery
      • Bissell Green Vs. Spot
      • Clean Vacuum Filter
      • Coredy R750
    • Clean Ceramic Tile Floors
    • O Cedar Mop Head
    • Shark Steam Mop
    • Clean Microfiber Mop
    • Microfiber Mop Guide
    • Smear-Free Window
  • Laundry
    • Wash Silk Pillowcase
    • Mold In Washing Machine
    • Steam A Dress
    • Remove Pen Ink
  • About Us
    • Contact Us
  • Show Search
Hide Search

How to Remove Dyson V6 Battery? Quick Guide

Clean Home Lab is reader-supported. When you purchase via links on our site, we may earn an affiliate commission at no extra cost to you. Learn more.

Table of Contents

  • Steps for Remove the Battery from Dyson V6  
    • Empty the Dust Bin 
    • Detach the Dust Bin from the Body 
    • Remove the Two Screws Holding the Battery in Place 
    • Remove the Battery
  • Reasons for Dyson V6 Battery Not Charging 
    • It’s Not Plugged In  
    • Airway Is Blocked 
    • Less Battery Life
    • The Charging Cord Is Damaged  
    • The Battery Casing Is Damaged
    • Check-Up the Fuse
    • Mounting of Charging Station 
  • Conclusion 

Last Updated on December 15, 2022

How-to-Remove-Dyson-V6-BatteryThe Dyson V6 vacuum cleaner’s original battery has a three-year life span. Depending on how you use it, a complete recharge can last anywhere between 20 and 30 minutes. You’ll begin to notice a drop in performance after two years, unfortunately. 

The Dyson vacuum cleaner’s battery might need to be changed to restart it. Two screws hold the battery in place within the vacuum. These screws may be removed with a 0x55mm screwdriver. You may take the battery out of the Dyson vacuum by unscrewing the two screws on either side of the handle. Put the new battery in place now by pushing it up and aligning it with the battery openings.  

See our review: Bissel Iconpet Cordless Vacuum

In this guide, we’ll learn how to remove the Dyson V6 battery with an easy but effective step-by-step process.

Steps for Remove the Battery from Dyson V6  

Here are the steps that need to be taken to remove the Dyson V6 battery:

Empty the Dust Bin 

To open the trap door and empty the contents of the dust bin, depress the red lever beneath the trigger. Before moving on to the next step, it is essential to empty the container of its contents.

Detach the Dust Bin from the Body 

Retaining the red lever firmly will allow users to unlock the lock holding the dust canister. The body and container can then be separated. The second screw holding the battery in front is easily reachable when the bin has been taken out.

Remove the Two Screws Holding the Battery in Place 

Two screws—one directly in front of the handle, below the red release lever, and the other beneath the handle—hold the batteries in place. To remove the screw below the handle and the bolt up front, you’ll need a 0x55mm screwdriver and a slightly bigger 0x60mm screwdriver, accordingly. 

Remove the Battery

When both screws are loose, remove the battery. Whenever you need to insert a new battery, first remove the old battery through these steps. Then close it well so that the vacuum can return to its original working condition.

Reasons for Dyson V6 Battery Not Charging 


Here are the reasons why Dyson V6 batteries don’t charge:

It’s Not Plugged In  

The battery can only be charged when the apparatus is plugged in. If your Dyson vacuum is plugged in make sure the cable is safe. Make sure it is securely plugged into a nearby electrical outlet by inspecting it.  If it appears to be loosely attached, you have plugged it in incorrectly.

Airway Is Blocked 

An essential component of the vacuum cleaner is the airway. It allows the electric current required to charge the vacuum cleaner to pass through in addition to the air. Clogging will take place if you use the device to remove big particles like hair, food particles, etc.

Don’t be shocked if the vacuum cleaner is open and it resembles a dumpster instead of a machine. It’s not necessary to take the vacuum to a technician to fix the charging issue. It must be cleared out.

Less Battery Life

After 16 hours of continuous charging, if the Dyson still only has a battery life of 8 minutes remaining, the battery has to be exchanged. It may not have the same strength as it had before.

If you are cleaning less than normal and still facing this problem then the overheated battery may be the cause. It could be the best time for a battery exchange if any of these are true.

The Charging Cord Is Damaged  

A damaged charging wire likely is to blame for the device not charging properly. If not maintained correctly, wires can become worn out; however, they never give way on their own.

If we discover that the power cord for the vacuum has been harmed, we may either purchase a new one or request a replacement from the vacuum manufacturer.

The Battery Casing Is Damaged

Similar to other vacuum cleaners, the pack of the battery for Dyson vacuums is located on the handle. By removing and lifting a little cover that is securely fastened in position with Velcro, one can quickly reach it from the handle. For V6 devices and newer models, a screwdriver is required to eliminate the screws keeping the cover in place as well as the release tabs underneath the casing.

Remove the vacuum cleaner’s battery, and then carefully inspect it for any damage. To avoid having a piece of malfunctioning equipment or getting into an accident, users should exchange the batteries with the new one as soon as possible if there is any damage to the battery case.

Check-Up the Fuse

The fuse is another factor that can be keeping the machine from charging. Devices called fuses to guard against appliance potential fires and overheating. When there is a short circuit, this can be done by turning off the electricity to the machine.

If the vacuum isn’t charging, the power cable may be blocked with dirt, which makes it unable to effectively dissipate heat and causes the trip of the fuse, cutting off electricity to the vacuum. Looking at a circuit fuse is the best approach to inspect it. With the help of a screwdriver, unlock the charging cable head.

Mounting of Charging Station 

Ensure that the charger is fixed to a barrier or other solid surface before using it. It does not charge as quickly if it’s placed on a solid surface as opposed to dangling from a hook or wire. Please make sure you’re correctly following these guidelines to fix this:

  • Shut off the charging device.
  • From the home’s main switch, shut off the electricity.
  • Use a tool to find the stud to locate the studs in the wall. 
  • Make a level mark with a pencil on a place in which you can put the mounting screws.
  • In the same area that is penciled in, drill holes in the wall.
  • Fix the station of the charging screws.

See Shark Apex Vacuum Review

Conclusion 

Several safety measures cover overheating, short-circuit, overcharge, over-voltage, over-current protection, and some others. These capabilities allow us to work without breaks. Don’t charge the battery when it is hot.  If the battery heats up while functioning, stop for a while.

Related articles:

  1. Hoover Vacuum Won’t Turn On: Quick Troubleshooting
  2. Can You Vacuum Baking Soda? Is It Harmful?
  3. Bissell Little Green Vs. Spot Clean: Worth Investing
  4. Central Vacuum System Pros & Cons : Ultimate Guide 2023

Filed Under: Guide, Vacuum Cleaning

Reader Interactions

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Primary Sidebar

Categories

  • Carpet Cleaning
  • Dishwasher
  • Drain Cleaning
  • Floor Cleaning
  • Guide
  • Laundry
  • Reviews
  • Vacuum Cleaning

Latest Updates

  • Water Backing Up in Dishwasher – Here’s What to Do
  • How to Drain Water From Automatic Washing Machine Manually?
  • Maytag Centennial Washer Problems – Common Issues
  • How to Get Mold Out of Carpet? – A Comprehensive Guide
  • How to Unclog a Washer Drain? – Ultimate Unclogging Tips
  • How to Clean A Shark Vacuum : Things To Follow
  • Clothes Discoloration After Washing
  • Code 5D Whirlpool Washer: A Brief Guide
  • Does Alcohol Stain Clothes : A Brief Guide
  • Does Cotton Shrink In The Dryer : A Brief Guide

CleanHomeLab.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.


Copyright 2022 © Clean Home Lab · All Rights Reserved.