How to Reset Frigidaire Dishwasher? Easy Ways to Reset

Last Updated on December 15, 2022

Technology has provided us with advanced equipment to reduce our workload, and the dishwasher is one of them. If users face issues with their dishwasher, removing the dishwasher isn’t always a solution. Sometimes, they need to reset the dishwashing machine. One of the top brands of dishwashers in an ever-changing industry is Frigidaire. With a variety of models and features, it is suitable for all kinds of kitchens. We can reset our Frigidaire dishwasher for a variety of reasons, from a power outage to a system failure. 

Find the cancel button on the control panel’s far-right side and hold it down for 3 to 4 seconds. Take a 5-minute break. Hold down the start button for 3 seconds or until the light display changes or disappears.

We’ve broken down how to reset the Frigidaire washer into several steps in this article. So without any further delay, let’s get started!

It is the most usual and natural method of resetting. The steps are as follows:

• Simply press the cancel button and hold it for almost three seconds.
• Restart the machine after waiting at least five minutes.
• All programs and settings have been removed from the system. The users can change the settings and load new dishes.

Before turning the button on again, turn the power off for 5-10 minutes and press the button “start” for 1 second to get this thing up and running as quickly as possible. The error code will no longer be shown if the reset process is successful.

If you can’t turn off the dishwasher, switch off the breaker. Here’s what to do:

• Locate the circuit breaker and turn it off for 5 minutes to reset the Frigidaire dishwasher.
• Disconnecting the power stops the dishwasher from running and allows it to reset and recalibrate while fixing a problem.
• Turn the circuit breaker back on after a few minutes.

If no error codes appear on the screen, try conducting a test load on a rinse-only cycle with a few plastic or non-valuable dishes. If everything goes according to plan, use Frigidaire dishwasher as usual!

It’s possible that a Frigidaire dishwasher won’t start because of a power supply issue. To begin, perform these basic tests to rule out any issues with the power source:

• Ensure that the power cord is fully inserted into the outlet.
• Do not use extension cords to power the equipment because most of them cannot properly handle the voltage.
• If the electricity isn’t coming on, look for blown fuses and circuit breakers.

This could indicate a system fault, so check the display for any error codes and try to reset the unit—resetting tends to clear simple error codes. Another option is to replace the complete control panel as well as the touchpad.

If Frigidaire dishwasher does not drain, its drainage system may be plugged. If you don’t want to replace drain hose, simply remove all of the dishes from the top rack and hit the reset button on your control panel.

Then wait 10 minutes before replacing all of the dishes on the rack and turning it back on.

The following are some of the Frigidaire dishwasher codes of errors and their solutions:

Error code PF

The term “power failure” can refer to whatever thing from an electricity loss to a circuit breaker issue. This problem may be resolved by returning the device or replacing the circuit.

Error code HO

The dishwasher uses low-temperature water and does not require human assistance. All we have to do now is wait for the appliance to reach the desired temperature.

Error code I30

The pan of the dishwasher is leaking, as indicated by this error. Examine this element and, if necessary, replace or fix it.

Error code I20

It can also show I40 or IFo, which indicates a clogged drain line. The frequency with which this error code appears can be reduced by cleaning the filter.

Error code LO

It indicates that the rinse aid reservoir is low and that users should refill it.

The following measures can normally be taken to rectify this:

• To switch off the dishwasher, press the POWER button.
• Wait 10 seconds after turning off the dishwasher’s circuit breaker.
• Re-energize the dishwasher’s circuit breaker.
• To switch the dishwasher on and start a new cycle, press the POWER button.

To put your dishwasher in diagnostic mode, hold the High Temp and Start or Cancel buttons until the Dishwasher test starts. Release these buttons if the lights on the upper door of a dishwasher are on. Some dishwasher models feature displays, and if they have 01 written on them, it implies that the test has begun.

Disconnect the power, wait 5 minutes, and then reconnect the power to your Frigidaire dishwasher to restore factory settings. A hard reset will clean the memory and any faults the dishwasher has been experiencing. You can reset the dishwasher a second time if the memory isn’t completely cleaned, but you’ll have to wait up to an hour for power to be restored.

Frigidaire dishwashers do not have a specific reset button, but there is a button on the control panel that can be used to reset it. The machine will be reset and the water in the tub will drain if you press gently and hold the cancel button for a few seconds until the lights on the control panel change.

If none of the previous approaches work, you may need to hire an expert to figure out what the problem is. It is less expensive to employ a service technician than to purchase a new dishwasher.