How to Take Apart A Bissell Proheat Pet Carpet Cleaner

Table of Contents

Last Updated on December 6, 2022

Repairing different parts of your Bissel Proheat Carpet Cleaner may not be difficult until you have to take apart all the components to fix the issue and assemble it back to the position.

You must take apart the whole machine to resolve several problems associated with your pet carpet cleaner. If it is not cleaning deeply or taking so long to remove even ordinary stains, the need to take it apart is essential.

However, following some necessary instructions can make disassembling the machine easier and quicker. In this post, we have elaborated on how to apart a Bissell Proheat Pet Carpet Cleaner.

Procedure To Follow on How to Take Apart A Bissell Proheat Pet Carpet Cleaner

The best solution to any serious problem with machinery can be sorted out by taking apart its sections. You can also simply do some troubleshooting to get rid of minor issues.

Identifying the reason for the carpet cleaner not functioning might seem perplexing, but once you have found it out, the solution is very simple. You shouldn’t struggle to buy a new unit in case of such issues.

Follow the steps described below to take apart your Bissell Proheat pet carpet cleaner.

Tools Require to Disassemble Carpet Cleaner

Only a few essential tools are required to disassemble a Bissell pet carpet cleaner that you might have already inside your home. Tools such as screwdrivers and needle nose pliers should always be present while taking apart a carpet cleaner.

Each gadget has a specified role, such as pliers are useful to remove the components by providing the extra grip.

Find Out The Components of Your Bissell Carpet Cleaner

The process doesn’t start with taking a screwdriver to unscrew all the nuts and bolts of the machine to examine it. You must do a few things before initiating the process, such as preparing your carpet cleaner to take it apart.

You must turn off your machine and remove the plug from the switch.
Examine thoroughly to find out if your pet carpet cleaner is required to be taken apart in order to reach the belt.
If there is a metal handle present in it, you don’t need to take it apart.
If the handle is made of plastic, then you need to remove the wand and hose first to remove the handle.

However, some issues associated with it must be resolved for better cleaning results.

Remove the Hose & Wand

A small clip will connect the machine’s handle to restrict water leakage or dirt entrance to the carpet cleaner.
To push the clip and then release it, you must use some flat material that can choke it.
Move it in your direction to remove the connected tube with the base of the Proheat carpet cleaner.
Use the same methodology to remove the wand present beneath the carpet cleaner handle.

Detach the Water Container

Now moving towards the lower panel of the machine, remove the container having dirty water inside it.
This is a simple process where you just need to push the lid, and it will come off.
Now pick up the front side of the cleaner and pull it slowly.
Be careful while pulling it apart as small clips binding it may not break off at this step.
Once the clips are opened, the part will easily come out sliding to provide you access to the interior of the cleaner.

Lift the Top Cover

After exposing the interior, now you need to remove the upper cover of the machine.
The cover will come off easily as no clips are linked to it.
A little movement will be required to detach the top cover, and then you can pull it all together.
If the belt of your Bissell carpet cleaner requires replacement, you must do it at this step when the cover has been removed.
The belt can be accessed by pulling the agitator assembly and then returning it after the belt has been changed.

Disconnect Agitator

As the cover of your machine is removed, now you can easily pull off the agitator assembly.
To remove the assembly, first, unfasten the brush roll.
With a little force, it will be removed from the position.
No particular equipment is required to detach these parts as they can simply come off by hand.
Treat the belt carefully because it is responsible for turning the brush roll.
Now remove the agitator assembly and also the belt.
It’d be easy to detach the belt if the agitator had already been removed.

Assemble All Parts Back to Their Position

To assemble the parts of your Bissell proheat pet carpet cleaner follow these steps:

When you are done fixing all parts, pack them up back to their origin.
First, you need to put the agitator assembly back to its position.
Then fix the belt along with spindles.
Adjust the front side and close the panel.
Now place the dirty water container in its place.
Close the lids and wiggle the lower side of the carpet cleaner to close all the opened clips.

Taking Care of Your Bissell Proheat Pet Carpet Cleaner

It is the best time to clean all the parts of Bissell Proheat Pet carpet cleaner, including its filter.
Remove the filter and wash it with great care to get rid of all the dirt and debris collected on it,
You can use warm soapy water to wash it.

Final Thoughts

Now, as you are aware of how to take apart a Bissell proheat pet carpet cleaner, you can manage all repairs and regular maintenance requirements.

You must do everything accurately to ensure no part of your machine breaks or gets damaged during the process. When you have completed the maintenance, place all tools and the carpet cleaner back in a safe place. It is better to run a test to check out if everything is working smoothly.

If there are no leaks, loud noises, and the machine picks up the water, you shouldn’t worry about anything.