Last Updated on July 12, 2022
Grease, dirt, mold, stains, and bed bugs can all be removed with superheated pressured steam without using harsh chemicals. The majority of cotton and wool carpets, granite, laminate tiles, ceramic tile, waterproof wood flooring, and washable wallpaper are among the many surfaces that may be safely used with the steam cleaner.
Although there are several steam cleaners available in the online market, the Pur steam cleaner is the best. With a 3 to 4-minute warm-up period, it heats swiftly. Use the powerful attachments to thoroughly clean the difficult-to-reach parts of the house for more focused cleansing. Included is an extension hose for different applications. Pur is a well-known company. Same as the usage of Bissell Crosswave, the Pur cleaner is also easy to use.
In this article, we’ll discuss how to use Pur steam cleaner and how we can fix Pur steam cleaner if it is not doing steaming properly.
See How To Clean Carpet Without Vacuum Cleaner: Click Here
Steps for Clean the Carpet with Pur Steam Cleaner
As the name suggests, Pur steam cleaning is a cleaning technique that turns water from a liquid into steam by heating it to a high temperature. Deeply embedded filth, dirt, and dust may be removed from carpet fibers by properly vibrating them with hot, high-pressure water.
Cleaning up the areas where the soiled carpet surface is located is the first step. Large furniture such as tables, chairs, and other items must be removed from the workstation.
The next step is to mist and apply a cleaning solution to the surface of the stained carpet for a short period, and then agitate the carpet fibers to break up and release any embedded debris.
After the solution of cleaning has dried, the fibers of the carpet are filled with hot steam or vaporized water heated to 200 degrees Fahrenheit to remove any remaining water and soap. The potent extraction equipment eliminates the leftover carpet dirt after removing the stains and embedded dirt.
A fan or a dryer can be used to dry the carpet quickly and easily. Typically, it takes 2 hours to clean and 4 hours to dry a 3000-square-foot carpet. To be used the following day, the carpet can be allowed to dry overnight at normal room temperature or in an air-conditioned space.
How to Unclog a Pur Steam Cleaner
Here are some ways to unclog the Pur Steam Cleaner:
Do Not Use the Mop
Before performing any maintenance, keep the steam mop off and allow it completely cool down. Before beginning this process, ensure sure everything has cooled and is switched off since steam cleaners use the hot water at boiling point and can reach extremely high temperatures. To avoid leaving any untidiness on the floor you’re trying to clean, dump the water supply after you’re certain the mop is off.
Find out the Mop’s Exit Point
The steam usually exits from a point on steam mops, which is either a nozzle or spray tip. It can be found on the manufacturer’s website. Find out the manufacturer of the steam mop, then search online for a handbook.
Clean the blockage
To attempt and fish out stray gunk or debris, use a robust instrument that will best fit within the opening without damaging it. The accumulation could be visible immediately at the nozzle’s front. However, the obstruction can be deeper in the hose or nozzle and will require more effort to clear.
Dissolve the Obstacle/ Blockage
Any mineral blockage that is still creating issues can be removed with vinegar. To remove the obstructions, either pour vinegar straight into the nozzle or you can use a cotton pad. Any sanitizing cleaning chemicals will work if vinegar is not present at the home.
If you use this method, be careful to remove any remaining vinegar from the hose as soon as possible with a steam cleaner. To prevent internal damage, avoid to put vinegar in the steam mop tank.
How to Fix When Pur Steam Cleaner Not Steaming
Before start to worry, check sure the reservoir of the Pur Steam Mop is full of fresh water since, without it, there will be no steam. Give the mop around 30 seconds to heat up and create steam after filling the tank to the fill line before continuing with additional troubleshooting techniques.
Add More Water
The water supply should be checked first. You won’t have much steam to deal with if cleaning efforts have used up all of the water in the mop tank.
Find out how rapidly you’re MOP consumes water so you can schedule the cleaning sessions accordingly. Before adding extra water, always let the mop cool and turn it off.
Check the Power Outlet
No matter how stupid it may seem, double verify that everything is plugged in when using an electrical wall socket. Especially if the water tank is full but no steam is being created.
It’s possible that the plug was taken out of the wall while the appliance was being used. If it doesn’t work, you might try to test if the outlet is working. Electricity can only be accessed by turning on 3. certain outlets.
Adjust the Setting
Check the settings on the mop. Steam mops come in many different models, and each one has a unique set of instructions. Certain steam mops contain dials for steam control or kid locks that may need to be turned.
Make sure the water tank cap is properly put on as you verify those settings. The mop won’t have enough pressure to create steam if it is not positioned properly. If the settings appear to be correct, the water tank is full, and you’re still experiencing problems, it could be time to check for blockages.
Pur Steam’s 2.2-pound steam mop is a lightweight option that can sanitize carpet or area rug fibers down. On the lowest setting, the 11.5-ounce reservoir can steam for up to 25 minutes. With this steam cleaner, there is no need for harmful chemicals, only tap water is enough.