Last Updated on July 5, 2022
Getting bored of washing dishes by hand and wanting a dishwasher? When you are thinking of renovating the kitchen, you might consider installing a new dishwasher. Modern society considers dishwashers to be as necessary as refrigerators and ovens in most kitchens. Always choose a dishwasher that runs long last. The second thing to consider is size, dishwashers vary in size.
A dishwasher should be no more than 35 inches high, 24 inches wide, and 24 inches deep. Most dishwashers come in this standard size, and most kitchens are designed to accommodate these dishwashers.
When selecting a dishwasher, it is crucial to take thorough measurements, comprehend dishwasher capacities, and select the functions you will use the most. This guide can assist users in measuring their cabinet opening, choosing an internal layout, and eventually choosing the appropriate size dishwasher for the kitchen, from standard to small space.
Read on for information that will enable you to make the best choice possible, whether you’re searching for a small residential model or a large commercial unit.
Different Dishwasher dimensions
Users must be familiar with the fundamentals of the dishwasher to choose the appropriate size. Therefore, one must understand the type of dishwasher based on the size.
Modern residential homes with spacious, restaurant-sized kitchens frequently have oversized dishwashers installed. These dishwashers have bigger openings than the norm.
The width of an oversized dishwasher typically ranges from 30 to 42 inches. Their heights and depths frequently match those of 24-inch-deep and 35-inch-high standard-sized dishwashers.
People who live in single apartments and small families should choose a built-in dishwasher. These people only have a small number of pots and plates to clean after every meal.
A built-in dishwasher typically measures 24 inches in width. 35 inches high and 24 inches deep. You need a cabinet opening to fit this dishwasher.
Compact dishwashers are designed for apartments with limited space and a small kitchen. If the kitchen cabinet is limited in space, you can still fit these dishwashers.
These units will fit into significantly smaller apertures because they are only 18 inches wide. Despite being smaller, they often have the same height and depth measurements, which are roughly 24 inches deep and 35 inches wide.
The same cabinet opening that would hold a built-in dishwasher can accommodate a portable model. They are also perfect for people who don’t already have a dishwasher.
The smallest and lightest choice is a portable dishwasher, which weighs only 49 pounds. It can hold up to eight place settings and is 33 inches high, 22 inches deep, and 19 inches wide.
The least expensive type of dishwasher is a countertop model. Additionally, they are the tiniest dishwashers. These dishwashers in no way fit beneath the countertop. Instead, they are connected to water by a device that attaches to the kitchen faucet and sits on the counter.
The dimensions of countertop dishwashers range from 16 to 22 inches in width and 17 to almost 20 inches in height.
Commercial dishwashers can be used in every type of foodservice establishment, from high-volume cafeterias to little snack shops.
Commercial dishwashers come in a variety of sizes and can accommodate 12 to 24-place settings. They typically measure 26 to 30 inches deep and up to 60 inches high, making them substantially deeper than typical household dishwashers.
Best Ways To measure the height, width, and depth of a dishwasher?
Height: Gauge the distance from the ground to the countertop’s lowest point.
Width: Measure the width from one cabinet to the other cabinet using a measuring tape. It’s preferable to allow some leeway on every side than to have it fit snugly.
Depth: Measure the depth from the front of the cabinets to the back of the opening. Keep in mind that the door of the dishwasher will reach past the cabinetry. Ensure there are almost 27 inches of space available in front of the dishwasher for loading and unloading.
What Tools Do You Need To Measure A Dishwasher?
Something to measure and record:
Write down each measurement, and for further security, take a photo with the phone and email it to yourself. If it is possible, add a small illustration to help you remember which number corresponds to which area of the appliance.
A measuring tape:
Use a contractor’s tape measure that displays precise measurements like 1/8 or 5/8 for the best results.
How To Fit A Dishwasher If The Dishwasher Size Of The Opening Is Wrong?
- If the measured sizes seem different on every side, center the dishwasher to close the gap and level out both sides.
- Use a saw to precisely fit the spacing between filler wood pieces.
- Over an old sheet, place the wood. Paint the cabinets now.
- Allow the wood to cure for a minimum of 12 hours.
- The dishwasher should be removed. Completely turn off the supply of water.
- Put some wood filler up against the cabinet’s side wall.
- On the second side, repeat the same steps.
- Reposition the dishwasher into place, then reattach all of the hoses and cords.
How To Install A Dishwasher On The Floor?
- Place and level the dishwasher at a location that is appropriate for its size and function, on a floor that can handle its weight.
- Install the dishwasher close to a water source, an outlet, and a drainage system.
How Heavy Dishwasher Is?
Standard dishwashers measuring 24″ W x 25″ D x 34″ H and holding 10 slots typically weigh between 75 and 95 pounds, or 34 and 43 kilos. However, some dishwashers, frequently of higher quality, may weigh 120 lb. (54 kg) and roughly 125 lb. (57 kg) total for shipping. Due to their proportionately smaller size, countertop dishwashers that measure 21″ W x 19″ D x 17″ H will be lighter and weigh between 55 and 60 lb. (or 25 and 27 kg).